2.5mm-6.0mm Welded Gabion Box Gabion Mesh Cage With Spirals Locking Pins And Stiffener

Welded gabion box ,Gabion Cages, welded wire mesh panels, gabion retaining wall, gabion rock
 
Welded gabion box
 
is made of welded wire mesh panels assembled with spirals locking pins and stiffener. The philosophy of the

Welded gabion is similar to woven gabions. Weld gabion units consist of panels of welded wire mesh, secured

together to form a gabion unit, which is filled on site with gabion stone to form the appropriate structure.

 
Welded gabion are classified according to coating, as follows:
 
Style 1, consists of welded wire fabric made from wire which is zinc coated before being welded into fabric.Spiral

binders, lacing wire, and stiffeners are produced from zinc coated wire.
 
Style 2, consists of welded wire fabric which is made from uncoated wire and the fabric is subsequently zinc coated

after fabrication. Spiral binders, lacing wire, and stiffeners are produced from zinc coated wire.
 
Style 3, consists of welded wire fabric made from wire which is coated with zinc-5 % aluminum-mischmetal alloy

(Zn-5Al-MM) before being welded into fabric. Spiral binders, lacing wire, and stiffeners are also produced from

zinc-5 % aluminum-mischmetal alloy (Zn-5Al-MM) coated wire.
 
Product Details:
 
Wire diameter:2.5mm,3mm,4mm ,5mm,6mm etc.
 
Materials:Galvanized steel wire; Galfan coated wire, stainless steel wire
  
Galvanization:electric galvanizing, hot dip galvanizing, high dip galvanizing, zinc-aluminium alloy, 5% zinc-aluminium, 10% zinc-aluminium
 
Surface treatment:spray, spray paint, dip, can choose different colors.
 
Mesh Size:Commonly used mesh: 5x5cm, 5x10cm, 7.5x7.5cm, 10x10cm
 
Special mesh: 2.5x10cm, 3x3cm, 4x4cm, 5x20cm Customized mesh
 
can be customized according to the requirements of the corresponding mesh
 
 

Application of welded gabion basket:

Control and guide of water or flood

Flood bank or guiding bank

Preventing of rock breaking

Water and soil protection

Bridge protection

Strengthening structure of soil.
Protection engineering of seaside area
 
Installation:
 

How to install welded gabion box?:

1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
4. Gabion box filled with graded stone by hand or with a shovel.
5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the up