Rectangle Welded Masonry Wall Reinforcing Ladder Block Mesh 10cm Width

10cm width Rectangle welded Masonry Wall Reinforcing Ladder Block Mesh
 
Masonry Wall Reinforcing Ladder Block Mesh description:
 
Masonry Wall Reinforcing Ladder Block Mesh is configured by welding of galvanized steel rod in H form
or designed angle. Galvanized before welded or galvanized after welded ladder mesh products are provided
by Concreate for horizontal joint reinforcement of the masonry wall system. In construction, the ladder block
mesh is put embedded in the horizontal mortar joints of masonry walls. It consists of two parallel side wire
rods with cross rods welded at 16” (400 mm) O. C., thus forming a ladder configuration.
Overall measurement (side-to-side rod) is approximately 2” (50 mm) less than the nominal wall thickness.
 
Masonry Wall Reinforcing Ladder Block Mesh specification list

Masonry Wall Reinforcing Ladder Block Mesh Export Specification

 
Masonry Wall Reinforcing Ladder Block Mesh Surface Treatment:

1. Welded after hot dipped galvanized;
2. Welded after electro galvanized;
3. Welded before electro galvanized;
4. Welded before hot dipped galvanized;
5. Welded by stainless steel wire.

 
Masonry Wall Reinforcing Ladder Block Mesh packing way: 

• In Bundle 
• In Pallet 
• In wooden box
• As your packing way

 
Masonry Wall Reinforcing Ladder Block Mesh widely application:

• Building Surface,
• Building Wall,
• Ground,
• Bridge,
• bank,
• airport.

 
Masonry Wall Reinforcing Ladder Block Mesh make process:

                                                                           Black wire Welded

                                                                    Surface Galvanized treatment
 
Masonry Wall Reinforcing different shape can choose:


Show our Masonry Wall Reinforcing Ladder Block Mesh Product pictures as follows:


 

 
Our company: